Sunday, March 29, 2015

Volleyball Basics - Liberos

Liberos are back row defensive specialists. They can only play in the back positions. They can enter the game freely (Libero is an Italian word meaning free) between rallys, ie the libero may replace any back row player without counting toward that set's substitution limit. When the libero leaves the court, the original player replaced must return to the game for the libero. To simplify this, the libero wears a different color jersey, and libero replacement happens between the attack line and end line, rather than between the attack line and center line as in standard substitutions.

The libero has a few rules that are unique to the position. The libero cannot block or attack at the net. Attackers cannot hit the ball above the net when the libero overhead sets on or in front of the attack line. The libero often is usually not permitted to serve.

Like the middle blockers, the libero is the anchor for the back row defense. They call out whether the setter is front row or back row. Usually teams have libero's base defense position in zone 5. When this is the case the libero usually is responsible for covering front row setter tips. Sometimes setters can be persuaded to pass up on attack attempts by talking across the net to tell the setter that you have his or her tips covered. Liberos also call out what hitters are front row and whether they are stacked or split. They also might be responsible for calling out where other back row defenders should be to dig hits from the different zones or players. They also might be responsible for adjustments to serve receive positioning for different servers. A key responsibility liberos have is to take the first contact on free balls. Liberos theoretically should be one of the best passers on the team. Taking that first contact on as many balls crossing the net as possible opens up the 4 hitters on the floor to get into position to make a full approach and swing. When middles are serving, this responsibility typically falls on the back row middle.

Liberos base defense position is usually in zone 5. Middles played back row defense in zone 5 before the introduction of liberos. Partly because liberos replace middles, this has carried over. Some teams put liberos in zone 6 instead. Most attack attempts go to zone 6, so placing your best defensive player here makes a lot of sense. In theory this is the libero. Still, most teams play liberos in 5. A big consideration for whether to play liberos in 5 or 6 is how much of a role back row attacks by outside hitters will play in your system. Having the outside in 6 and the libero in 5 simplifies making the back row outside a viable hitting option. The outside is already in or close to position to make a full approach. Placing the outside in 5 might place the better defender (libero in 6) in position to take the most hits (improving overall defensive performance), but the trade off is making the back row outside in 5 work harder to hit from 6. Not only because of the need to move from zone 5 to 6 to make yourself available to hit, but also because the base defense position will be closer to the net. Being closer to the net might make getting a full approach more difficult.

Liberos in men's volleyball were originally outside hitters who passed well, but for one reason or another weren't playing in hitting and blocking roles. One such situation involved three senior outside hitters, but a junior outside hitter was an excellent passer. That outside played libero that year even though he was 6'5". Liberos usually are some of the shortest players on any team. As the libero position was more widely adopted and time passed with liberos in the game, we are seeing players who have only played libero. Women's volleyball has employed back row only defensive specialists that substituted in normally long before the introduction of the libero. There the transition to the new position was more instantaneous.

Passing in serve receive and in defense are primary skills. Ideally your libero should be the best passer on the team. Liberos should have good foot speed to get to more balls in emergency situations. Overhead passing is also an important skill, but most of the time as a pass, not a set. Court awareness is critical in situations where the setter took the first touch and the libero is taking the second touch. Knowing where you are on the court and whether or not to overhead set is important in those situations.

See also:
Zones of the Court

Volleyball Basics are intended to present some of the fundamental volleyball knowledge that everyone serious about the sport should know.

Sunday, March 15, 2015

Volleyball Basics - Middle Blockers

Middle blockers are front row blocking specialists. They are generally, but not always, the tallest players on the court. They are the anchor for the front row defense. They hit and block in zone 3. Most teams have the middle blocker play back row defense in zone 5, but they usually are replaced by the libero as soon as they lose serve.

When the middle blocker's team is serving, the middle's responsibility is to call out information about the opposing team's offense. First, the middle calls out whether the setter is on the front row or back row, and therefore whether the setter is an eligible hitter. Second, the middle calls out who the front row hitters are and where they are, split (on both sides of the court in serve receive), or stacked (all on the same side of the court in serve receive).

In serve receive, the middle blocker's primary responsibility is to get into position to hit. Middles rarely pass in serve receive. Most of the time the middle will only pass on short serves, or serves that hit the tape. Middles usually hit quick attacks. With a perfect pass, and the full offensive system available, the middle is chronologically the first option. A middle who is not set can still play a big role in the offense by making the opposing middle commit to block, opening up the pin hitters to only a solo block.

While middles are typically the tallest players on the court, middles should be chosen because of skill set. Because of their importance in front row defense, middles need to be able to read and understand the opposing offense as it develops. Ball Setter Ball Hitter is an important skill. The middle needs to quickly determine if the middle is going to be set and move to block where the ball is set. They need the ability to make a decisive move to block at the pins and be able to close the distance from the middle of the net to the wing blocker. Middles also need to be able to hit quick hits across the middle third (or more) of the net. Excellent middles can also make their approach to hit deceptive, making the first steps of the approach toward the front of the setter and the final steps to hit behind the setter for example.

See also:
Volleyball Basics are intended to present some of the fundamental volleyball knowledge that everyone serious about the sport should know.

Saturday, February 21, 2015

Volleyball Thought Experiment - 2 Left Handed Hitters

Some time ago I was in a practice where the team was preparing for an upcoming opponent that could have had two left handed hitters. One would probably play opposite. The other possibly at outside hitter. The team practicing had a left handed hitter, and they asked another lefty to come in and play with the scout team. It was a strange set up with two lefties in a standard rotation. The opposing team ended up only playing one of the lefties, but I often wonder if there is an effective way to play both at the same time.

As a thought experiment, I took a bit of time and looked at how it would be to put the outside hitters in zone 2 on the front row, and the opposite and setter in zone 4 on the front row. I kept the outsides in zone 6 on the back row, and flipped the libero and setter/opposite sides. This puts the left handed hitters facing the setter when hitting both front row and back row. The opposite now hits from zones 4 and 5. The real question was what the serve receive rotations would look like.

I sketched the rotations* out based on the traditional lineup ( setter in 1, outside 1 in 2, middle 2 in 3, opposite in 4, etc). They got real weird and unwieldy. The only rotations that worked out well were the ones with outside hitter 1 in the front row. The other rotations had hitters getting piled up in each other's hitting lanes, and left handed and right handed hitters hitting in the "wrong" places.

Not satisfied with that, I flipped the positions' serve order and tried again. This time it worked out. It would be a strange thing to play against, and to play within at first, but I was able to get usable serve receive rotations that are very comparable to the standard ones. There is an unavoidable rotation were outsides and opposite have to hit from the "wrong" side, but the standard rotations have that as well.

A few interesting things that became apparent with the flipped rotations. One is that a quick hit behind the setter is now the most natural hit for right handed middles. Another is that right handed setters are ideally positioned to swing for a kill on the second contact.

This setup will also be a good thing for left handed middles. Quick hits in front of the setter will be better suited to left handed middles. This makes me wonder if this is something that would only be really useful with not only 2 left handed pin hitters, but also at least one left handed middle. The unusual nature of this lineup might make it worthwhile with just the two lefty outsides. I know I would have a hard enough time trying to adapt my way of thinking to deal with the strangeness during a match. Maybe even with warning and good scouting. It would just look strange. I can only imagine what players facing this would think.



*I'm not going to include the sketches because they are ugly, and I don't think it's worth that much effort to make it look pretty. 

Friday, February 20, 2015

Set Distribution from LBSU vs BYU Feb 20, 2015

Tonight #9 LBSU played at #5 BYU. BYU won this one in 3 sets (25-22, 25-16, 25-22). I tracked stats on set distribution again because of the primary camera view from the side of the court. I did pretty much the same thing this time around, but I added side out tracking. Side out percentage (SO%) is easy to track, and I like to have SO% available to me all the time. Ideally I like having SO% by rotation, but that would be a bit much to track along with set distribution.

I basically organized the information the same as last time. There weren't any setter attacks on the second contact during this match. Both teams set zones 2 and 4 extensively. LBSU set zone 6 a lot more (about 13% vs about 5%), but still not a significant amount. Even combined with attacks by the middles, the pin hitters are still getting about 75% of sets for LBSU and 80% of sets for BYU. I can't help but wonder if Tyler Hildebrand's coaching has to do with the higher percentage of sets to zone 6. Coach Hildebrand is the acting head coach and a former setter at LBSU. He was the starting setter for a very good 2004 team that finished the season dropping a very close 5 set match against BYU in the national championship final. He led the nation in assists per set that year, and he has some international experience with the US team.


Here are the set distribution numbers along with attempts in those zones by FBSO attempts, other attempts, and total attempts. Both teams had some success setting zone 3 and BYU had some success setting zone 6, but both didn't have that many attempts in either zone. That may have to do with passing, but I don't have passing stats for the match. LBSU probably wouldn't see much of a change in kill percentage by setting the outsides more, or setting the opposite more. BYU on the other hand looks like they might have a little better kill percentage if they shift the set frequency a little more toward zone 2. Their zone 2 kill percentage was best, but zone 4 got 1 more set than zone 2 for every 10 total sets. If the zone 4 and zone 2 set distribution was swapped, they would have scored almost 1 kill per set more. Even more so if zone 2 was the primary option on FBSO attempts.

Here are the FBSO numbers alongside the SO numbers. I have heard of 70% as a SO% goal for men's college teams. A few other numbers to further break down the SO numbers. LBSU scored 17 points on FBSO kills, 13 points on BYU serving errors, and 9 points after the FBSO attempt. That leaves 28 missed SO attempts that were that were not receive errors that were either hitting errors, BYU blocks or BYU kills. BYU scored 16 points on FBSO kills, 14 points on LBSU serving errors, and 13 points after the FBSO attempt. There were 19 missed SO attempts that were not receive errors that were either hitting errors, LBSU blocks or LBSU kills.

Wednesday, February 18, 2015

All I Really Need to Know About Coaching I Learned From This Quote

Many years ago I read the book All I Really Need to Know I Learned in Kindergarten by Robert Fulghum. It is a series of short essays about, well, life. It's an easy read. There are a lot of reflections and observations about life that are worthwhile. It's not groundbreaking philosophy or anything, but I like the title. The title refers to the first essay in the book. It mentions how the rules we learn playing in the sandbox at kindergarten will serve us throughout our lives. With that in mind, I present you with the best quote on coaching volleyball I have ever heard:
"Since we learn best in training situations that are basically gamelike, we should incorporate three contact drills as often as possible. I am convinced that the best hitting drills are pass, set, hit (P-S-H), the best setting drills are P-S-H and the best passing drills are P-S-H. Likewise, the best defensive drills are dig set hit combinations." - Marv Dunphy
 Marv Dunphy was the coach during the 1988 Olympics when I first watched and was getting interested in volleyball. In my naivete I thought he was the best coach in the world. I don't know if he was the best coach in the world, but he was definitely one of the best coaches in the US. He probably still is. His Pepperdine teams are regularly quality teams, and they are always strong blocking teams. I have heard opposing coaches with good blocking teams talk about how they did well to actually out-block Pepperdine.

The quote itself is great. Through repetition it drives home what we should be doing in practice. If a skill can be taught, or a drill done with the three fundamental contacts (pass, set, hit), it probably should be done that way in practice. There are times when cutting out some of the three contacts might have value, but the importance of pass, set, hit shouldn't be questioned. The quote can be adapted to other skills as well. For example: The best serving drills are serve, pass, set, hit. The best blocking drills are pass, set, hit, block. Students of motor learning should see the value here. Giving our athletes repetitions are going to give them the optimal environment for growing and improving.

Also lurking within the quote is the idea of gamelike training. We want our practices to replicate the stresses of actual competition as much as possible. This is another motor learning gem. Conventional wisdom states that a basketball player who misses free throws in games should shoot a lot of free throws. This leads to the player shooting large volumes of shots at a time, like more than 10 in a row. While this might improve the player's skill in that event, it does not replicate the conditions of the game. Often that hypothetical basketball player hits those 10+ free throws at good percentage of the time, but still doesn't perform well during competition. Shooting 1 or 2 high pressure shots periodically through practice will have a better likelihood of making the player better in shooting free throws during a game. All too often coaches like to do similar things in volleyball, like high volumes of serves without the subsequent pass, set, hit. Our players are never going to have to block (or dig) a hitter hitting self tossed sets from a box in competition.

There is a flow to volleyball. A lot of that flow is built on the pass, set, hit drum beat. Don't clip your athletes' wings by stifling that flow. Allow and encourage them to play out rallies. Give them drills that attempt to replicate the situations they might face in competition. Don't teach the skills of the game in a way they will never see. Stick with pass, set, hit.

Sunday, February 15, 2015

Volleyball Basics - Ball Setter Ball Hitter

One of the most important volleyball skills for defense is the eye sequence Ball Setter Ball Hitter. This is a foundational skill for both front row defense and back row defense. It is interesting to watch the eye work of teams to see if they are following this basic pattern. Some defenders will make the play in spite of watching the wrong things. Ball Setter Ball Hitter is something that should be drilled into teams, and regularly checked for and reinforced.

The first Ball in Ball Setter Ball Hitter is to watch the ball after serve receive or a dig. The defensive player watches the ball as it travels from the passer to the setter. A number of things can be determined by the ball’s path. The defensive player should be able to know where the setter will need to be to set the ball. Will the setter be able to set from the base offensive position? Will the setter be off the net? Will the setter have to jump to set, or will the ball come over the net? Is the ball travelling in a high or low arc? Will any of these influence the decisions the setter can make? Will they be in their offensive system? With a good pass the setter is going to have a lot of options. With a bad pass, the setter may only have one solid option. The defensive players should know this about when the ball reaches the apex of its path to the setter.

As soon as the defensive player knows what can be learned from the pass, eyes go to the setter. The defensive players watch the setter for any cues as to where the set will go. A lot of setters will have different body language leading up to a front set or back set. Defensive players watching the setter can get an early idea of where the ball is going and what they will need to do to make a play. This step could gain more significance with scouting. Scouting could shed some light on tendencies and other visual cues.

The second Ball in Ball Setter Ball Hitter is to watch the ball after the set. Like the first Ball, the defensive player watches the ball as it travels from setter to hitter. Again a number of things can be determined from the ball’s path. What hitter is being set? Is the set close to the net, or even going over the net? Is the set off the net? Is it inside? Is it outside? Is it low or high? With a good set the hitter is going to be able to swing with a good approach. The hitter will have more options for ball placement. With a bad set the hitter might only be able to hit in one direction. The hitter might only be able to tip. Again the defensive players should know this when the ball reaches the apex of it path to the hitter.

As soon as the defensive player knows who is hitting, eyes go to the hitter. If there is a complete lapse and Ball Setter Ball Hitter is not fully followed, the defensive players should at least watch the hitter. Too often eyes linger on the ball too much after the pass and after the set. Too often blockers will jump to make a block attempt and their focus is entirely on the ball. Watching the hitter will tell a lot more than watching the ball. Foremost is the hitter’s approach. Hitters usually will hit along the line of their approach. Blockers getting in the line of the approach will make a bigger impact on their likelihood of getting a block touch, and to do that they need to be watching the hitter. Beyond that the hitter could give some cues with body language as to where the hit will go. Some hitters will have a different swing when hitting line and cross court. More often than that hitters will have different swings when hitting and tipping. Scouting could give an idea of hitter tendencies as well.

Players can get a better feel for where they need to be by focusing on the Ball Setter Ball Hitter eye work. Coaches should check for Ball Setter Ball Hitter from time to time. It’s a simple thing, and it should be the foundation of the defensive game.

Volleyball Basics are intended to present some of the fundamental volleyball knowledge that everyone serious about the sport should know.

Saturday, February 7, 2015

The Competitive Cauldron

Some time ago the book Training Soccer Champions by Anson Dorrance was recommended to me primarily because of its mention of the competitive cauldron. Anson Dorrance is the ridiculously successful head coach of the North Carolina women’s soccer team. I found this video on youtube with Coach Dorrance talking about the origins of the cauldron.


The competitive cauldron is essentially a scoring and ranking system for practices. Players compete with each other during practice in drills that are games with winners and losers. Different things are tracked, all of it is compiled, and the players can see where they rank within the team. It attempts to put an objective value on what they do within games, and gives an incentive to get to the top and stay on top.

When I did a search for “competitive cauldron”, I came across this site with “11 Reasons Why You Should Create Your Own Competitive Cauldron”.  A couple of them stood out to me, numbers 4 and 7.

Number 4 is, “Works on developing and perfecting skills in a pressurized, game-like environment.”
This touches on the principle of motor learning, the specificity of learning hypothesis. Making game-like drills with as much game-like pressure as possible during practice is the optimal way to improve skill execution during actual game situations. Basketball players often practice free throw shots in sets of 10 or more, when they will never shoot more than 3 at a time during a game under reasonable circumstances. Some can go 10 for 10 in practice and then regularly miss during games. Shooting occasional pairs of free throws throughout practice with a set of sprints on the line for missing will have far greater transfer to performance in that skill during the game. Players still shoot them in tens and twenties.

Number 7 is, “Creates objective data and standards to guide your playing time decisions.”
I’ve used limited versions of the competitive cauldron with every team I have led since. I have ranked outsides and liberos by serve receive stats. I have ranked setters by winning percentage and side out percentage. I have ranked hitters by hitting efficiency. It is a very handy accessible way to determine starters and playing time. There is a lot that can be done. Most of what I have done is with just one or two others to collect data, sometimes just myself. With enough help, I could have all of that and more, and I could give the players a ranking chart showing where they stand on the team. It can also be used to handicap the starters in games pitting starters against backups. Depending on the level of detail in the data, you could even know what players will perform best in close games with advancing in the tournament at stake.